Sig Sauer® P220®

(61 reviews) Write a Review
Orders received before 3pm EST, M-F, ship the same day.



TekMat is the creator of original printed cleaning and maintenance mat. Our 17” TekMats are large enough to handle a fully disassembled handgun with room to spare for tools and accessories. The 1/8” padding on these mats not only provides a premium feel and high level of quality but it offers extra protection from any rough handling or drops while working on your firearm. The ultra soft, oil and water-resistant surface helps protect your firearm from scratches while the diagrams and illustrations help with cleaning, disassembly and are just plain fun to look at.

Warranty Information


  • PROTECT YOUR GUN AND YOUR WORK AREA - The soft thermoplastic fiber surface ensures your gun doesn’t get scratched while the extra thick, 1/8” neoprene rubber will protect your work surface and prevent the mat from sliding. This mat will also keep harmful chemicals, oil and dirt from penetrating down to your desk, bench or work area where you normally clean and work on your Sig Sauer P220.
  • OVERSIZED DESIGN - This Sig Sauer P220 gun cleaning mat measures 11” x 17” and is 1/8” thick. The oversized design gives you plenty of room to disassemble your handgun and to clean it without having to move parts all over. The thick 1/8” neoprene rubber backing ensures the cleaning mat will protect your firearm and work surface.
  • QUALITY GUN CLEANING MAT - This Sig Sauer P220 gun cleaning mat by TekMat is made to exacting standards. This begins with the water-resistant, scratch proof, fade and oil resistant dye-sublimation printing. This heat transferred printing impregnates the ink into the fibers for a lifetime of durability. TekMat does not silkscreen their designs like a lot of other inferior gun cleaning mat manufacturers.
  • EASY TO USE - This Sig Sauer P220 gun cleaning mat comes with an overview of the history of the Sig Sauer P220 as well as a simple to follow parts diagram of the parts that make up your Sig Sauer P220. The Sig Sauer P220 cleaning mat rolls up for easy storage along with your other cleaning supplies and accessories.


Protects your Firearm


A soft polyester top will ensure your gun doesn't get scratched while cleaning. Also, there are no loose fibers that you have to worry about getting into the components of your gun.

Superior Design


TekMat created the original schematic gun cleaning mat and continues to innovate with new designs, better quality materials, and original art.

Mat Thickness


All TekMats use superior neoprene and our TekMats are 1/8 of an inch thick.

Firearm parts list


Each TekMat has a complete list of parts for each firearm. This is incredibly helpful when replacing parts and maintaining your firearm.



This gun cleaning and parts mat measures 11 inches by 17 inches and 1/8 of an inch thick.

Dye Sublimation Printing


TekMat uses dye sublimation printing which uses heat to bond the ink with the fabric surface. This ensures the printing will not scratch off or fade.

Oil Resistant


All TekMats are oil and solvent resistant. They will not penetrate the neoprene and are easy to spot up.

Non-slip Backing


The neoprene rubber backing on the TekMat will keep everything in place and prevent the mat from sliding on your work surface.



All TekMats are waterproof. This means they will not absorb water and are easy to clean. Simply use soapy water to lightly scrub the polyester surface. Rinse with clean water and the TekMat will be as good as new.

Surface Protection


This TekMat will keep harmful chemicals, oil and dirt from penetrating down to your desk, bench or the area where you normally clean and work on your firearms. The soft neoprene will also prevent dents or scratches on your work surface.

Nothing to see here.

61 Reviews

  • 5
    Quick delivery and a great product

    Posted by Tightevo

    I ordered two mats and they both arrived within a week. I spilled solvent on one of them and it seems to be holding up just fine, no wearing of the graphics and no delamination of the mat itself. So far I would 100% recommend!

  • 5
    Last a long time, I use it to keep ...

    Posted by David Ray

    Last a long time, I use it to keep my laptop from scratching a glass desk and it doesn't slide.

  • 5

    Posted by Doc H

    Handy little mat when you don't want to pull out a larger one. Just about the right size for cleaning the SIG; a little smaller than some mats I've used, but it accommodates your disassembled P220 and some cleaning stuff without getting spread out all over the bench. Prevents small parts from rolling around (and shows where they go in the gun!) and cushions your countertop and your gun. Recommended.

  • 5
    Clean space

    Posted by Ezydusit

    Very pleased with this. It is a perfect place to clean your gun and not worry about your table getting stained with cleaner or oil. I felt the size was just right for the task of cleaning my gun.

  • 5

    Posted by P. R. B.

    Love these things. Holding up well under use.

  • 5
    My P220 likes this mat.

    Posted by Seal Scott

    This mat has just the right amount of space to take apart, clean and assemble a P220. The neoprene has the right amount of thickness - not to squishy, while providing enough protection against the accidental drop of a machined metal slide. The graphics are legible and it has a decent exploded view of the parts.

  • 5
    gun cleaning mat

    Posted by ShinyPartsUp

    I bought the Sig Sauer cleaning mat for my handguns. The mat is soft on blued and nitrite treated guns and does not allow oil to seep through to the table below. It is a large enough area so my .357 with 4 inch barrel or my P220 carry do not feel cramped; even disassembled for cleaning with brushes and patches, etc laying on the mat. I washed it once on gentle cycle when it got a bit saturated from a spill of oil. It dried nicely. The only downside is the oil smell doesn't go away like a throw-away rag, but I just store it wth cleaning supplies out of the way. All the pluses, including the nice exploded view of my Sig, make it a great accessory to gun care.

  • 5
    Excellent product

    Posted by Ken Marsh

    Excellent product. Although it doesn't slip around considerably on many different surfaces, I bought it to use as a placemat at my little table I eat at at the sofa area. So far it has worked out very well I can eat food over it which looks pretty cool and it washes well and is pretty durable. I would recommend purchase of this for anyone who wants a build mat for the Sig.

  • 5

    Posted by Dr. RM

    Nothing more than a sponge pad to protect ur bench top from dent damage from accidental drops of sharp/heavy parts while working/cleaning your pistol, as well as chemical spills. I got it mostly for the imprint in case I forget where a part goes or need the part number. And just plain looks cool. Have one for my Glocks too and one for my Ruger 10-22 as well.

connect with us on instagram